LORD MAXLOK T6S
Harmonization Code : 3919.10.80 | Other self-adhesive plastic rolls not exceeding 20 cm wide.
Main features
- 6 to 9 Minute Work Time
- 20 to 24 Minute Handling
- Exact MX/T6S Cured Data
Product Description
LORD Maxlok T6S Acrylic Adhesive is a two-component structural acrylic adhesive used with LORD Maxlok MX accelerator for bonding supported metals and composites. Its off-white to tan paste formulation is part of the Maxlok S-series offered as an alternative to welding, brazing, riveting and other mechanical fastening methods in assemblies exposed to high impact or peel loads. T6S provides 6 to 9 minutes of working time and reaches handling strength in 20 to 24 minutes at 77 deg F (25 deg C). The non-sag system supports cartridge or automatic dispensing, while cured-system properties include tensile strength, elongation, modulus and glass transition temperature for the exact MX/T6S system.
Key features
- Balanced T6S work time: Provides 6 to 9 minutes of working time and 20 to 24 minutes to handling strength at 77 deg F (25 deg C).
- Non-sag structural placement: Supports cartridge or automatic application on vertical and overhead bond areas.
- Cured-system properties: Cured MX/T6S properties include tensile strength, elongation, modulus and glass transition temperature.
Applications
Applications include structural bonding of supported metals and composites as an alternative to selected mechanical fastening methods.
TDS, SDS & Technical Documents
Technical Specifications
General Properties
Additional Information
As-supplied / before-processing properties
Typical component and mixed-system values apply specifically to Maxlok T6S adhesive with MX accelerator.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Component appearance | Off-white to tan paste; grey paste | - | T6S adhesive; Maxlok MX accelerator |
| Adhesive viscosity | 70,000 to 200,000 | cP | Typical; Brookfield at 77 deg F (25 deg C); T6S adhesive |
| Accelerator viscosity | 100,000 to 500,000 | cP | Typical; Brookfield at 77 deg F (25 deg C); Maxlok MX accelerator |
| Adhesive density | 8.4 to 8.9 | lb/gal | Typical; T6S adhesive |
| Flash point | 53 (11) | deg F (deg C) | Typical; T6S adhesive |
| Working time | 6 to 9 | minutes | Typical; T6S/MX system at 77 deg F (25 deg C) |
| Time to handling strength | 20 to 24 | minutes | Typical; 50 psi shear; T6S/MX system at 77 deg F (25 deg C) |
| Shelf life | 9 | months | Each component; original unopened container below 80 deg F (27 deg C) |
After-processing / final-state properties
Typical numeric properties are exact to cured Maxlok MX/T6S; qualitative resistance and service data retain the series-document scope.
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Tensile strength at break | 2800 (19.3) | psi (MPa) | Typical cured Maxlok MX/T6S adhesive |
| Elongation | >10 | % | Typical cured Maxlok MX/T6S adhesive; ASTM D638 |
| Young's modulus | 108,778 (750) | psi (MPa) | Typical cured Maxlok MX/T6S adhesive |
| Glass transition temperature | 194 (90) | deg F (deg C) | Typical cured Maxlok MX/T6S adhesive |
| Service temperature | -40 to 300 | deg F | Documented performance range for Maxlok MX/T6S (-40 to 149 deg C) |
| Environmental resistance | Resistant | - | Cured system; qualitative resistance to dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering |
| Indirect UV resistance | Excellent | - | Cured system; qualitative characteristic |
