BOSTIK LADH1255
Harmonization Code : 3907.30.00.40 | Epoxy Mold Compounds containing by weight more than 70 % silicon dioxide
Main features
- No Two-Part Mixing Required
- Moisture-Curing Bond Development
- Automotive Interior Assembly
Product Description
Bostik LADH1255 is a one-component moisture-curing solvent adhesive for automotive interior bonding and assembly. The blue liquid uses a modified styrene-rubber base and has about 21% nonvolatile content with viscosity of approximately 200 cP at 25 deg C. Its one-component format avoids combining separate adhesive components before application, while moisture cure defines the bond-development mechanism. LADH1255 combines liquid one-component handling with moisture-curing bond development for automotive interior bonding and assembly operations.
Key features
- One-component handling: No separate adhesive components are combined before application.
- Moisture-curing system: Moisture cure is the defined bond-development mechanism.
- Defined liquid properties: Blue modified styrene-rubber liquid with about 21% nonvolatile content and approximately 200 cP viscosity at 25 deg C.
Applications
Automotive interior bonding and assembly.
TDS, SDS & Technical Documents
Technical Specifications
General Properties
Appearance
Blue Liquid
Appearance at room temperature.
Chemistry Type
Base Polymer: Modified Styrene Rubber | Solvent: Methylcyclohexane, Cyclohexane, and MEK
Density (g)
0.816 g/cm3
Thermal Properties
Flash Point
10 °C
The flashpoint of a solvent is the lowest possible temperature at which it can vaporize to form an ignitable vapor.
Flashpoint is often confused with “autoignition temperature”, which is the temperature at which a solvent ignites without an ignition source.
Physical Properties
Viscosity
200 mPa.s
Viscosity is a measurement of a fluid’s resistance to flow.
Viscosity is commonly measured in centiPoise (cP). One cP is defined as
the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP.
A product like honey would have a much higher viscosity -around 10,000 cPs-
compared to water. As a result, honey would flow much slower out of a tipped glass than
water would.
The viscosity of a material can be decreased with an increase in temperature in
order to better suit an application
Additional Information
Technical properties
As-supplied properties
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Appearance | Blue liquid | Typical physical property | |
| Base polymer | Modified styrene rubber | Typical physical property | |
| Nonvolatile content | About 21 | % | Typical physical property |
| Viscosity | Approximately 200 | cP | 25 deg C; typical physical property |
