BOSTIK LADH1211

Harmonization Code : 3208.20.90 | Paints and varnishes that are dispersed or dissolved in a non aqueous medium

BOSTIK LADH1211

Main features

  • Sprayable One-Component Application
  • Unprimed Polyolefin Bonding
  • Pressure and Vacuum Forming

Product Description

Bostik LADH1211 is a one-component moisture-curing solvent-based adhesive for automotive interior trim assembly. The blue, medium-viscosity liquid is designed for spray application and can be used as a contact adhesive for pressure bonding and vacuum-forming processes. Its application scope includes unprimed polypropylene and unprimed polyolefin foam. Typical as-supplied data include 22% nonvolatile content and approximately 200 cP viscosity at 25 deg C. These characteristics define LADH1211 as a sprayable automotive interior adhesive for low-surface-energy substrates and forming workflows.

Key features

  • Sprayable one-component format: Medium-viscosity liquid for spray application without two-part component mixing.
  • Unprimed polyolefin bonding: Application includes unprimed polypropylene and unprimed polyolefin foam.
  • Pressure and vacuum forming: Used as a contact adhesive in pressure-bonding and vacuum-forming interior-trim processes.

Applications

Automotive interior trim bonding, including unprimed polypropylene and polyolefin foam.

Product Family

BOSTIK LADH1211

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Appearance
Appearance at room temperature.
Blue Liquid
Chemistry Type
Base Polymer: Modified Styrene Rubber | Solvent: Methylcyclohexane, Cyclohexane, and MEK
Density (g)
0.816 g/cm3
Thermal Properties
Flash Point
The flashpoint of a solvent is the lowest possible temperature at which it can vaporize to form an ignitable vapor. Flashpoint is often confused with “autoignition temperature”, which is the temperature at which a solvent ignites without an ignition source.
10 °C
Physical Properties
Viscosity
Viscosity is a measurement of a fluid’s resistance to flow. Viscosity is commonly measured in centiPoise (cP). One cP is defined as the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP. A product like honey would have a much higher viscosity -around 10,000 cPs- compared to water. As a result, honey would flow much slower out of a tipped glass than water would. The viscosity of a material can be decreased with an increase in temperature in order to better suit an application
200 mPa.s

Additional Information

Technical properties

As-supplied properties

PropertyValueUnitMethod / condition
AppearanceBlue liquidTypical physical property
Base polymerModified styrene rubberTypical physical property
Flash point50deg FClosed cup; typical
Density0.816g/cm^3Typical physical property
Nonvolatile content22%Typical physical property
Viscosity200cPBrookfield RVT #2/20; 77 deg F (25 deg C); typical

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers